Application of Occupational Safety and Health (K3) on The Project ASANKA Building Yogyakarta Development

Authors

  • Joseph Jaga Nuhan Civil Engineering, Faculty of Engineering, Sarjanawiyata Tamansiswa University Yogyakarta
  • Dewi Sulistyorini Civil Engineering, Faculty of Engineering, Sarjanawiyata Tamansiswa University, Yogyakarta
  • Angga Darmawan Civil Engineering Department, Universitas Sarjanawiyata Tamansiswa, Indonesia

Keywords:

occupational safety and health, K3, K3 program, obstacles to implementing K3

Abstract

Yogyakarta is a unique city, it is very possible to continue to build centers and infrastructure along with office buildings, shopping centers, accommodation and apartments. OSH software in production initiatives plays an important position in maintaining, protecting and fostering a safe, healthy and accident-free environment. During the implementation of the OHS program, some stakeholders still need to provide guidance to construction workers, but apart from that, the level of knowledge and understanding of workers is still very low, which can cause problems. can cause obstacles in the implementation of the excise program. This study aims to identify the implementation of the K3 program and the obstacles in implementing this program in the Yogyakarta Asanka building project. This research was conducted by distributing questionnaires to the Yogyakarta Asanka Building Construction Project. With the results of distributing questionnaires on the project with the number of respondents as many as 32 people with their respective roles/tasks in construction projects. Data analysis was carried out in Microsoft Excel, then the data was processed using a tool to determine the average distribution of the questionnaire and the standard deviation to measure deviations from the average size. the same sample of results with different deviations, measurement deviations to show the difference between high and low in the data obtained. Based on the results of the analysis it is known that the average value of the K3 program obtained is 4.586. This assessment concludes that it is important to protect the community by installing OHS signs inside and outside the project as well as signs indicating the presence of heavy vehicle paths to alert them at all times. workers about the importance of safety in the workplace and appealed to the public to always be careful around ongoing construction projects. For the constraints on OSH adoption, the mean obtained is 4.423, this assessment concludes that the constraints on OSH adoption are on the part of the workers, which is caused by the workers' lack of knowledge about K3 and the requirements of workers who are still in basic needs because personal safety is not a priority.

References

(Case Study at PT Indokon Raya),” Res. J. Civ. Eng. Study Program, Fac. Eng. Univ. August 17, 1945 Surabaya, 2018.

P. Pamungkas, B., A., Santoso, D., & Ninghardjanti, “Implementation of Occupational Health and Safety for Production Division Employees of PT. Iskandar Indah Printing Textile Surakarta,” 2018.

A. Indah, “Evaluation of the Application of Occupational Safety and Health (K3) in Building Projects in Cirebon Regency,” 2017.

R. Fridayanti, N., & Kusumasmoro, “Application of Occupational Safety and Health at PT Ferron Par Pharmaceuticals Bekasi.,” J. Off. Adm., vol. 4.

Downloads

Published

2022-08-19